Find the Best Concrete Recycling Services Near You

There are multiple crushing and pulverising equipment used for successful concrete recycling. Through large impactors and equipment with jaws, the concrete will first be broken up. Next, it will be run through by a secondary impactor. Finally, it is screened to remove the dirt and other particles, separating the large and small aggregates. In removing these particles, separators or magnets may be used. It is also recommended to use industrial crushing for recycling rather than pulverising. This is because when pulverising, the separation process is more challenging, resulting in contamination from smaller byproducts. To find out more about concrete recycling and if it can be recycled, visit our blog.

There are concrete disposal centres where you can dispose of your concrete waste. At these locations, the concrete waste will have to go through the breaking down process. Foreign particles and materials (metals and recyclable materials) will then be removed. The concrete pieces will be sorted according to their size and quality and will be crushed again to be used in aggregate products.

Recycled concretes can be used for the same purpose as new products. Below are some of the ways that these materials can be reused:

• Landscape mulch: It can replace gravels or river rocks usually used as ground covers and mulch.
• Permeable paving for outdoor hard surfaces (walkways, driveways, etc.): If laid correctly, recycled concrete can be used to create a stable and porous traffic surface which rainwater can filter through.
• Aggregate for mixing fresh concretes.
• Fill for wire cages: Both decorative and functional, you can use crushed gravel to fill your wire cages for your screen or retaining walls.
• Building material for oceanic reef habitats: Large pieces of recycled concrete can be put offshore to form foundations for corals to help in building new reefs.
• Controlling streambank erosion: Similarly, large pieces may also be placed along stream banks and gullies to help control erosion.
• Base for asphalt paving.

If you are a commercial entity wanting to dump your concrete wastes at your local tip, you may be charged with the "new construction and demolition waste levy." This usually costs around $75 per tonne. There will also be additional waste fees that will vary depending on the waste facility. Some facilities offer a clean concrete dump cost of $26 per tonne.

iseekplant has a wide network of concrete recycling suppliers across Australia. You can also find them in capital cities such as Brisbane, Sydney, Melbourne, Adelaide, Perth, Canberra and Darwin. We also offer concrete recycling hire solutions in all major towns and cities from the Gold Coast down to Newcastle, Central Coast, Ballarat and Geelong.

At iseekplant, you can find concrete disposal services that are fast and have reasonable costs. Whether in your home or construction and demolition sites, you can trust these concrete contractors to recycle and dispose of your concrete waste without damaging the environment or your property. Use our get a quote tool to easily get a quote for concrete recycling and disposal services in your area. You can give us a call on 1300 691 912 or email us at projects@iseekplant.com.au to submit your quote requests.

Yes, concrete can be 100% recycled. The process involves crushing the old concrete into aggregate, which can then be used as a base material for new construction projects, such as roads, pathways, and driveways. This recycled aggregate can replace natural aggregates, conserving natural resources and reducing environmental impact.

Furthermore, recycling concrete helps to divert waste from landfills, contributing to more sustainable construction practices. However, the quality and usability of recycled concrete aggregate can depend on the quality of the original concrete and the recycling process used.

Recycling concrete is relatively straightforward, but it does require specialised equipment and processes. The concrete must be collected, transported, and processed using crushers and screeners to break it down into smaller pieces. Reinforcing steel and other contaminants are removed during this process.

The resulting recycled aggregate can be used in various construction applications, making it a cost-effective and environmentally friendly option. While the basic principles of recycling concrete are simple, the efficiency and quality of the recycling process can vary depending on the equipment and techniques used.

Recycling building concrete involves several steps:

• Collection and Transportation: Demolished concrete is collected from construction or demolition sites and transported to a recycling facility.
• Crushing: The concrete is crushed using a jaw crusher or impact crusher to break it down into smaller pieces.
• Screening: The crushed concrete is then screened to remove any contaminants and to separate it into different size categories.
• Removal of Reinforcement: Steel rebar and other reinforcing materials are removed using magnets and other separation techniques.
• Processing: The clean, crushed concrete can be further processed to achieve the desired size and quality of aggregate.

The recycled concrete can be used in various applications, including as base material for roads, in new concrete mixes, and as fill material.

Dealing with concrete waste involves several strategies to ensure environmental responsibility and cost-effectiveness:

1. Recycling: Concrete waste is collected, crushed, and processed into recycled aggregate, which can be used in construction projects.
2. Reuse: Intact pieces of concrete can be reused in landscaping projects, retaining walls, or as fill material.
3. Landfill Diversion: Properly recycling concrete helps to divert waste from landfills, reducing environmental impact.
4. Regulations Compliance: Ensuring compliance with local regulations and environmental guidelines for handling and disposing of concrete waste.
5. On-Site Crushing: Some projects may benefit from on-site concrete crushing, reducing transportation costs and environmental impact.

Old concrete slabs can be repurposed in several ways to minimise waste and promote sustainability:

• Recycling: Crush the slabs into smaller pieces to create recycled aggregate for use in new construction projects.
• Landscaping: Use broken pieces of concrete for creating pathways, garden beds, or retaining walls, adding a rustic look to your landscape.
• Fill Material: Utilise old concrete as fill material for construction sites, helping to stabilise the ground and reduce the need for new materials.
• Pavers: Cut old slabs into smaller, uniform pieces to create durable and eco-friendly pavers for driveways or patios.

These methods help to reduce the environmental impact of concrete waste and promote sustainable construction practices.