How much can a tower crane pick up?

A typical tower crane can lift up to 18 metric tonnes, depending on its setup. The maximum lifting capacity is usually achievable when the load is positioned near the crane's mast. However, when the load is at the tip of the crane's jib (typically 70 metres long), the lifting capacity decreases significantly, often to around 1 to 2 tonnes. Tower cranes can also be attached to buildings to extend their height as the construction progresses, allowing them to reach even greater heights for lifting operations.

How do people get in a tower crane?

Crane operators must physically climb the tower to reach the cab, where they operate the crane. Inside the mast, operators ascend ladders, which can be hundreds of metres tall, depending on the crane’s height. Once inside the cab, they control the crane’s movements using levers, joysticks, and other control systems. Operators are required to perform thorough safety checks before beginning work each day to ensure both the crane and the worksite are safe.

What is the maximum load capacity of a tower crane?

Tower cranes have a maximum load capacity of approximately 18 metric tonnes, but this varies based on how the load is positioned. When the load is positioned closer to the mast, the crane can lift more weight. However, at the furthest point of the jib, the crane’s capacity decreases significantly. For example, while it can lift 18 tonnes near the mast, it may only lift 1.5 tonnes at the jib’s maximum reach of 70 metres.

How many limit switches are in a tower crane?

Tower cranes typically require at least four limit switches for safe operation. These switches control the crane’s movement both horizontally and vertically. They act as safety devices to prevent over-travel or collisions, ensuring that the crane stays within its operational limits, safeguarding both the equipment and workers on-site.

What is the wind speed limit for a tower crane?

Most tower cranes are designed to stop operations when wind speeds exceed 20 metres per second (about 45 mph or 72 km/h). This wind speed limit is typically provided in the crane’s operational manual. If wind speeds rise above this threshold, operations must cease to avoid instability, which could pose serious safety risks.

How many safety devices are in a tower crane?

Tower cranes are equipped with several safety devices to ensure safe and efficient operation. These devices include height limiters, slewing limiters, trolley limiters, weight limiters, and moment limiters. Other optional devices may include obstacle lights, anemometers (for monitoring wind speeds), and black boxes to record operational data. Together, these devices help prevent accidents and ensure the crane operates within safe parameters.

How It Works

Job BoardBecome a Supplier

Home/Tower Crane Hire

Find the Best Tower Crane Hire Near You

Get multiple rates & compare quotes from expert Tower Crane Hire companies in Australia, FAST!

Post a job
Receive multiple quotes
Choose your preferred Tower Crane Hire service

Where do you need Tower Crane Hire?

Describe your job and our suppliers will send you quotes

Popular Tower Crane Hire Locations

Brisbane CBD Adelaide Sydney Metro Melbourne Perth Metro Newcastle Canberra Geelong Gold Coast Sunshine Coast

Tower Crane Hire on iseekplant

Tower cranes are essential for lifting and moving heavy materials at significant heights on large-scale construction projects, such as high-rise buildings, bridges, and industrial developments. These cranes are typically fixed to the ground or attached to a structure, with a tall vertical mast and a horizontal jib that rotates to move materials. They are known for their impressive height and reach, making them ideal for precise lifting tasks in challenging environments.

At iseekplant, we connect you with top-tier tower crane hire services across Australia. Our platform partners with experienced professionals who provide tailored solutions, ensuring efficient and safe operations while adhering to all relevant standards and regulations.

Tower Crane Hire Rates Guide

Understanding the cost implications of hiring a tower crane is crucial for effective project budgeting and management. Below is a detailed guide on the typical hire rates for tower cranes:

Service	Rate (AUD)
Monthly Hire Rate	$15,000/month
Installation & Removal Fee	$60,000 (includes shipping, assembly and disassembly)

Note: All prices listed on this page are estimates, exclude GST, and are in AUD.

Additional Costs to Consider When Hiring a Tower Crane

When hiring a tower crane, there are several additional costs that may arise, which can impact your overall project budget. These costs typically include delivery, assembly, site preparation, and other logistical expenses. Here's a breakdown of some common additional expenses to consider:

Additional Cost	Standard Rate (AUD)	Description
Delivery and Mobilisation	$5,000 - $10,000	Includes transport of the crane to the site, depending on distance and crane size.
Site Preparation	$3,000 - $6,000	Preparing the site for crane installation, including ground stabilisation and access routes.
Crane Assembly & Dismantling	$60,000 - $80,000	The cost of assembling and dismantling the crane, including labour and equipment hire.
Operator Costs	$80 - $150 per hour	Cost of hiring a licensed crane operator. This may vary based on location and project complexity.
Safety Inspections	$1,000 - $3,000	Includes regular safety checks to ensure the crane operates within legal safety limits.
Additional Attachments	$1,000 - $5,000	Costs for specific attachments or accessories, such as extra-long jibs, remote control systems, or specialised lifting equipment.
Insurance	1-3% of total hire cost	Insurance coverage for the crane and project site, covering potential risks such as damage, accidents, or operational hazards.

Remember to ask your chosen crane hire company about any other potential fees or additional services that might affect your project’s cost. Whether you need specifics on operator rates, insurance, or mobilisation fees, our Get a Quote tool can connect you with suppliers who offer detailed, transparent pricing tailored to your requirements. Post your request today and receive a customised quote suited to your project’s unique needs!

Factors Affecting the Cost of Hiring Tower Cranes

Machine's Age and Brand: Newer models and reputable brands like Liebherr, Terex, and Potain often come at a premium due to their reliability and advanced features.
Location: The cost can vary significantly depending on the location within Australia, with metropolitan areas typically being more expensive due to higher demand and logistical challenges.
Project Duration: Longer hire periods may attract discounts, whereas short-term hires might incur higher daily rates.
Site Accessibility: Sites with difficult access may require additional equipment and labour for installation and disassembly, increasing the overall cost.
Additional Features: Advanced features such as remote control operation, higher load capacities, and extended reach capabilities can also affect the price.

Applications of Tower Cranes in Construction Projects

Due to their height and lifting capacity, tower cranes are essential for various construction projects. Here’s how they are applied in different industries:

Industry	Purpose	Impact
High-Rise Buildings	Lifting heavy materials to great heights	Enhances construction efficiency and safety for tall structures.
Infrastructure	Building bridges, highways, and tunnels	Ensures precise material placement in large-scale projects.
Industrial	Assembling large industrial components	Facilitates the construction of factories and warehouses.
Commercial	Constructing shopping centres, hotels	Speeds up the building process and improves logistics.
Special Projects	Unique architectural designs, stadiums	Enables the handling of complex and large components.

More Cranes for Hire on iseekplant

At iseekplant, we offer a comprehensive range of crane hire services to meet the diverse lifting needs of your projects. Whether you're involved in construction, infrastructure development, or any task requiring heavy lifting, our network of suppliers provides various crane types suitable for any application. Below is a list of crane hire services available on iseekplant, along with their applications and quick descriptions.

Equipment/Service	Application	Quick Description
All Terrain Crane Hire	Versatile lifting on various terrains	Cranes designed for both on-road and off-road construction projects, capable of navigating different ground conditions while offering substantial lifting capacities.
City Crane Hire	Lifting in urban environments	Compact cranes ideal for tight spaces in urban areas, offering high manoeuvrability without compromising lifting capacity.
Crane Hire	General lifting operations	A broad category encompassing various crane types for diverse lifting requirements across different industries and project scales.
Crane Truck Hire	Transporting and lifting heavy items	Trucks equipped with mounted cranes for self-loading and unloading, combining transportation and lifting capabilities in one vehicle.
Crawler Crane Hire	Heavy lifting on rough or uneven terrains	Cranes mounted on tracks (crawlers) providing stability on soft ground and excellent mobility on challenging sites, ideal for large-scale construction projects.
Franna Crane Hire	Pick-and-carry operations	Mobile cranes capable of lifting and transporting loads around a site without the need for outriggers, enhancing efficiency in material handling.
Hoist Hire	Vertical lifting of materials or personnel	Equipment used to lift loads or people vertically, commonly utilised in construction for moving materials between different levels of a structure.
Mini Crawler Crane Hire	Lifting in confined or indoor spaces	Small, versatile cranes that can navigate tight areas and pass through standard doorways, perfect for indoor construction or sites with restricted access.
Mobile Hydraulic Crane Hire	General-purpose lifting with mobility	Cranes with hydraulic systems for smooth operation, suitable for a wide range of lifting tasks with the convenience of easy relocation between sites.
Rough Terrain Crane Hire	Lifting on challenging ground conditions	Cranes built to operate on rough, uneven surfaces with four-wheel steering and high ground clearance, ideal for off-road projects.
Slew Crane Hire	Rotational lifting operations	Cranes capable of rotating 360 degrees, providing flexibility in lifting and placing materials at various angles without repositioning the entire crane.
Spider Crane Hire	Compact lifting solutions	Mini cranes with articulating outriggers (spider legs) for stability, ideal for confined spaces and delicate flooring, often used indoors or in areas with limited access.
Winch Hire	Pulling and lifting heavy loads	Mechanical devices that wind up or out a cable or rope to move heavy objects horizontally or vertically, useful in construction and industrial applications.

Find the Best Tower Crane Hire on iseekplant

Ready for your next big lift? Look no further! iseekplant connects you to Australia's premier tower crane hire specialists. With our vast network, you're bound to find an expert tailored to your project's unique demands. Additionally, you can find other crane hire services to get the job done efficiently. Drop us a line at projects@iseekplant.com.au or ring us at 1300 691 912. If you're eager to jumpstart, hit 'Get a Quote' to post your quote request immediately.

Read Less